T-EPE-0009-E Assembly of Center Bearing

Written By: Luis Ferreira (and one other contributor)
  • Comments: 0
  • Favorites: 0

Difficulty

Moderate

Steps

2

Time Required

Suggest a time??

Sections

1

Flags

0

Introduction

Technical Information:

  • No: T-EPE-0009-01-11 Replaces No: T-EPE-0009-00-11
  • Distribution: EPE, VV, VTK, EPT

  1. After assembling, the center bearing must be free of prestress The static axial displacement must not exceed s = ±3mm

    • After assembling, the center bearing must be free of prestress

    • The static axial displacement must not exceed s = ±3mm

  2. The maximum resulting angular displacement must not exceed βres = ±3° The maximum resulting angular displacement must not exceed βres = ±3°

    • The maximum resulting angular displacement must not exceed βres = ±3°

Finish Line

Author

with 1 other contributor

Luis Ferreira

Member since: 05/23/2016

7 Guides authored

Team

Spicer Member of Spicer

1 Member

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 30

spicer.com.br | sac@spicer.com.br | 0800-727-7012